Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 3.99.10 (WUFF) #0: Sat Oct 29 11:54:36 EDT 2005 jschauma@doppelbock.hpcf.cs.stevens-tech.edu:/share/src/sys/arch/i386/compile/obj/WUFF total memory = 502 MB avail memory = 490 MB BIOS32 rev. 0 found at 0xfd750 mainbus0 (root) cpu0 at mainbus0: (uniprocessor) cpu0: Intel Pentium M (Dothan) (686-class), 598.53 MHz, id 0x6d8 cpu0: features afe9fbff cpu0: features afe9fbff cpu0: features afe9fbff cpu0: features2 180 cpu0: "Intel(R) Pentium(R) M processor 1.50GHz" cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way cpu0: L2 cache 2 MB 64B/line 8-way cpu0: using thermal monitor 2 cpu0: 64 page colors pnpbios0 at mainbus0: nodes 21, max len 306 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x2590 (rev. 0x03) vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x2592 (rev. 0x03) wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 vendor 0x8086 product 0x2792 (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x2660 (rev. 0x03) pci1 at ppb0 bus 2 pci1: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci1 dev 0 function 0: Broadcom BCM5751M Gigabit Ethernet bge0: interrupting at irq 11 bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:0a:e4:39:fe:1d brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2658 (rev. 0x03) uhci0: interrupting at irq 11 usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2659 (rev. 0x03) uhci1: interrupting at irq 11 usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x265a (rev. 0x03) uhci2: interrupting at irq 11 usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x265b (rev. 0x03) uhci3: interrupting at irq 11 usb3 at uhci3: USB revision 1.0 uhub3 at usb3 uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered vendor 0x8086 product 0x265c (USB serial bus, interface 0x20, revision 0x03) at pci0 dev 29 function 7 not configured ppb1 at pci0 dev 30 function 0: vendor 0x8086 product 0x2448 (rev. 0xd3) pci2 at ppb1 bus 4 pci2: i/o space, memory space enabled cbb0 at pci2 dev 0 function 0: vendor 0x1180 product 0x0476 (rev. 0x8d) cbb0: using ioapic for interrupt vendor 0x1180 product 0x0822 (system subclass 0x05, revision 0x13) at pci2 dev 0 function 1 not configured iwi0 at pci2 dev 2 function 0: vendor 0x8086 product 0x4220 (rev. 0x05) iwi0: interrupting at irq 11 iwi0: 802.11 address 00:13:ce:6d:a0:84 iwi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps iwi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps cbb0: interrupting at irq 11 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 5 pcmcia0 at cardslot0 auich0 at pci0 dev 30 function 2: i82801FB (ICH6) AC-97 Audio auich0: interrupting at irq 5 auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo auich0: ac97: ext id 601 vendor 0x8086 product 0x266d (modem communications, revision 0x03) at pci0 dev 30 function 3 not configured pcib0 at pci0 dev 31 function 0 pcib0: vendor 0x8086 product 0x2641 (rev. 0x03) piixide0 at pci0 dev 31 function 2 piixide0: Intel 82801FBM Serial ATA Controller (ICH6) (rev. 0x03) piixide0: bus-master DMA support present piixide0: primary channel wired to compatibility mode piixide0: primary channel interrupting at irq 14 atabus0 at piixide0 channel 0 piixide0: secondary channel wired to compatibility mode piixide0: secondary channel interrupting at irq 15 atabus1 at piixide0 channel 1 vendor 0x8086 product 0x266a (SMBus serial bus, revision 0x03) at pci0 dev 31 function 3 not configured isa0 at pcib0 pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker sysbeep0 at pcppi0 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support npx0 at isa0 port 0xf0-0xff: using exception 16 isapnp0: no ISA Plug 'n Play devices found apm0 at mainbus0: Power Management spec V1.2 auich0: measured ac97 link rate at 48002 Hz, will use 48000 Hz audio0 at auich0: full duplex, mmap, independent wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA addressing wd0: 38154 MB, 77520 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs iwi0: link state changed to UP wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)